We decided to upgrade the sights on our Colt Series 80 Officer’s ACP. In addition to adding a Heine Ledge rear sight, we needed to replace the factory front sight with a new tritium model. The new sight will require a dovetail cut, unlike the staked version from the factory.
The Marine Corps and a Colt 1911 Two big things happened to me when I turned 18, I joined the Marines and I bought my first pistol (in the state I live in, you used to […]
Worst case scenario pin and screw removal- EDM machining in gunsmithing At the shop we tend to be exposed to some pretty unique challenges. Being the only full-service gunsmithing machine shop on an island with […]
Custom 1911 Project: Part 7- machining ball cuts on a 1911 slide, presented by Rifleshooter.com and Brownells This is the seventh installment of our Custom 1911 project- in this post we are going to machine ball cuts […]
You must be logged in to post a comment.