Removing a damaged or broken screw can be a difficult task. Sometimes just the head breaks off and if you’re lucky, some exposed screw shank is left behind that you can grab with pliers. Other-times, […]
Worst case scenario pin and screw removal- EDM machining in gunsmithing At the shop we tend to be exposed to some pretty unique challenges. Being the only full-service gunsmithing machine shop on an island with […]
Installation and removal of the barrel nut is the highest torque operation on an AR-15/M16 M4, AR-10, 308 AR type rifle. For this to be successfully accomplished, the upper receiver needs to be properly secured. […]
Installing a muzzle brake between centers It’s been a while since I posted a stand alone muzzle brake installation. Most of the brake installations on this site are on custom barreled match rifles, typically as […]
The Glock has become a staple of the American shooting culture. Thirty years ago it would be hard to believe this boxy plastic and steel gun chambered in a puny cartridge would become as popular […]
In this post Rifleshooter.com will build a clone of the United States Marine Corps M40A3 Sniper Rifle. Replacing the M40A1 in 1999, and used by the Marines until 2009, the M40A3 is characterized by its […]
While you can easily leave an empty dovetail notch alone or buy a pre-made insert, dovetail notches can be permanently filled to provide a high quality look to your build. It should be noted that the rifle […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.