First impressions of the Modular Driven Technologies (MDT) HS3 Chassis system. I’ve been using Modular Driven Technologies Chassis systems for nearly four years. Their first model, the TAC21 houses a Remington M700 in an aluminum chassis, […]
The Modular Driven Technologies (MDT) LSS chassis system offers Remington 700, Model Seven, Savage, Tikka T3 and Mossberg MVP shooters the ability to upgrade their rifle to a chassis system that uses a detachable magazine […]
308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″) Introduction Released by Winchester in 1952 (and adopted by NATO in 1954 as the 7.62x51mm NATO), the 308 Winchester has gained universal acceptance amongst […]
22″ 308 Winchester Load Development Part-2. This the second trip to the range working up a load for my 308 Winchester. On the first trip, I shot two, five-shot groups of each load. While it […]
308 Winchester Load Development I headed to the range to do some load development for my custom Remington 700 chambered in 308 Winchester with a 22″ long barrel (my previous load was a NRA High […]
6×47 (6-6.5×47) Lapua Review 6mm (.243″) cartridges are popular among target shooters in various disciplines. Low recoil and excellent external ballistics offer shooters the ability to use a flat shooting cartridge without getting beat up on […]
I really enjoy the custom Remington 700 .308 Winchester tactical rifle I built in Building a Custom Remington 700 .308 Tactical Rifle. After I wrote that, I did a few more modifications and posted them in How to […]
Since its introduction in 1989, the 338 Lapua Magnum has been a popular cartridge. The 338 Lapua was designed as a military cartridge to bridge the gap between the 308 Winchester/7.62 NATO and the .50 […]
Designed to bridge the gap between 308 Winchester/7.62 NATO and 50 BMG, the 338 Lapua Magnum (8.6×70) has developed an impressive following with long range shooters. When I built mine, I settled on a 22″ barrel, […]
Often high-volume shooters will re-chamber or set back a used barrel. Most do it to change calibers or give a worn throat new life. You need to have enough barrel shank to set back a […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.