Remington

Custom 1911 Project: Part 6- flat top and chain link top of slide, presented by Rifleshooter.com and Brownells This is the sixth installment of our Custom 1911 project- in this post we are going flat top and chain link the slide. Custom 1911 Project: Part 1- …

Review: Remington 700 SPS Varmint

July 18, 2016 // 0 Comments

Over the years I’ve built quite a few custom rifles on Remington 700 actions. The only factory parts I’ll typically use are the receiver and bolt assembly, everything else is upgraded.  When Remington offered a $75 rebate on the 700 Special Purpose Synthetic (SPS) Varmint, …

Since its approval by SAMMI in 2011, the 300 AAC Blackout (abbreviated 300 BLK) has been a popular choice with shooters.  Often recognized as the go to choice for suppressed applications with heavy subsonic loads; the lighter, supersonic offerings exhibit similar performance to the 7.62x39mm …

The 7.62×39 mm Russian cartridge has a strong following in the United States. While most shooters encounter it in the SKS or AK47, it is also available in more refined rifles like the Ruger Mini-30, Model 77, or CZ 527.  Unfortunately for the M700 shooters …

Since its introduction by Hornady in 2007, the 6.5 Creedmoor (sometimes shortened to Creed) has established a strong foothold in the US rifle market.  The 6.5 Creedmoor balances the excellent external ballistics of .264″ diameter bullets with manageable recoil. (FOLLOW US ON FACEBOOK!) Left to right, …

A compact version of the ubiquitous Remington Model 700, the Model Seven is an excellent candidate for a lightweight hunting rifle (to read more about the Model Seven action, click here).  In this post, I’ll be taking a used Model Seven synthetic chambered in 223 Remington and …

In this post I’ll be modifying a Remington 870 barrel that came on a Police trade-in shotgun.  This smooth-bore 20″ barrel is equipped with rifle sights from the factory.  It will be cut and crowned to 18.5 inches (without a lathe), it’s rifle sights removed, …

This is a custom Remington 700 precision rifle I built with my friend.  It is a collection of old and new parts. New parts purchased were a Remington 700 Left-Hand short action receiver with .308 bolt face, Shilen #7 Select Match Barrel with a 1:10 twist, …

Custom Remington 870 Wingmaster Build

May 5, 2015 // 0 Comments

I was lucky enough to find an old 870 Wingmaster receiver for sale.  Having been a Remington 870 aficionado since the mid-90s, I developed quite the collection of spare parts, and those parts needed an action. Normally, if you customize a shotgun, you start with …

1 2 3