We’ve been getting a lot of requests to build what we would consider a good general purpose AR15 upper receiver. With a focus on durability, reliability and ease of maintenance this is what we came up with, our own M4gery!
Equipped with a cold hammer forged chrome lined Daniel Defense M4 contour barrel and a carbine length gas system, parts for this upper will be easy to find down the line. Coupled with the Lite Rail 9.5 FSP, the shooter will have a similar firing grip to a mid length gun. The CSAT and tritium iron sights provide the shooter to engage point targets up close, as well as distant targets without changing his stock weld. The 2MOA Aimpoint T1 similarly provides a rapid aiming solution for up close targets, while providing a refined aiming point for far engagements while the Surefire Mini Scout Slight provides the ability to illuminate targets in low light conditions.
Compliment this upper with your collapsible stock lower, and you are ready to roll!
We began by ordering the following parts from Brownells:
Here are our suggestions for a basic carbine. Rifle Base rifle: Quality AR15 with either a carbine or mid length gas system. We consider Daniel Defense, Colt, Windham Weaponry and BCM top of the line […]
Based in the popular EXPS2, the Brownells/EOTech CQB T-Dot Holographic Sight provides the shooter with a 7-yard, 50-200 yard and 500-yard aiming points. Equipped with a quick detach lever, this sight is ready to mount […]
Nightforce B.E.A.S.T. 5-25×56 Review The needs of the various shooting disciplines differ greatly. Whereas the fixed distance competition shooter may be fine with higher magnification and precise .125 MOA adjustments, the military/law enforcement/tactical shooter is […]
You must be logged in to post a comment.