We recently scored a Marlin 336 in 35 Remington from a friend. Always on the prowl for a short, handy, woods gun; we decided this Marlin was in need of a straight stock. While it is hard to buy a trigger guard plate outright, some shooters will trade/swap them with one another. Inspired by this thread on the Marlin Owners Forums, we decided to convert our pistol grip to a straight grip.
In addition to a torch, saw rasp and mill, we used the following tools from Brownells for this project:
As always, this article documents our conversion and is presented for information purposes only. The use of metal working tools and a torch, requires strict adherence to safety protocols.
An oversized bolt handle on a Remington 700 allows for faster bolt manipulation and lets the shooter’s knuckles clear the objective lens of larger scopes. At one time they were fairly exotic upgrades but now […]
We recently decided to add a muzzle device to our factory cut and crowned Colt 16 5/8″ barrel. As always, the following is presented to document our projects and is for information purposes only. We […]
Custom 1911 Project: Part 7- machining ball cuts on a 1911 slide, presented by Rifleshooter.com and Brownells This is the seventh installment of our Custom 1911 project- in this post we are going to machine ball cuts […]
You must be logged in to post a comment.