Quick detach, flush mounted sling cups offer the shooter easy attachment and removal of a sling while remaining unobtrusive and snag free on the rifle stock. Unlike a traditional QD stud, flush cups are below the surface. For instance, when located on the bottom rear of a stock, a traditional stud can drag on a rear bag, with the sling removed, the flush cup does not have this problem.
For this project we ordered the following items from Brownells:
The contents of Rifleshooter.com are produced for informational purposes only and should be performed by competent gunsmiths only. Rifleshooter.com and its authors do not assume any responsibility, directly or indirectly for the safety of the readers attempting to follow any instructions or perform any of the tasks shown, or the use or misuse of any information contained herein on this website.
Spend enough time around firearms and you start to get excited about the little things: like simple products that address tasks that are frequently encountered and that you wish were easier. Finding a great way […]
Recently we decided to install “Rem-Choke” style removable choke tubes on two of our barrels. In our “3-Gun Competition Shotgun Build” article, we installed the tubes manually, without a lathe. All lathe work is conducted […]
Worst case scenario pin and screw removal- EDM machining in gunsmithing At the shop we tend to be exposed to some pretty unique challenges. Being the only full-service gunsmithing machine shop on an island with […]