Spuhr ISMS

Schmidt and Bender PMII LP MTC LT 5-25×56 review

August 4, 2017 Bill Marr 0

Schmidt and Bender PMII LP MTC LT 5-25×56 Review Schmidt and Bender is known for making high quality rifle scopes. If you take a look at the PM II lineup, you see it offers a wide […]

A look at how rifle barrels speed up: Measuring the increase of muzzle velocity in new barrels

July 31, 2017 Bill Marr 0

A look at how rifle barrels speed up: Measuring the increase of muzzle velocity in new barrels Seasoned shooters and barrel makers will often tell you new rifle barrels speed up. Normally they say something […]

7mm Remington Magnum load development: 197 gr and 183 gr Sierra MatchKings (SMK)

July 25, 2017 Bill Marr 0

7mm Remington Magnum load development: 197 gr and 183 gr Sierra MatchKings (SMK) In the days before the current 6.5mm craze, cartridges with a “metric” bullet size in the name never really caught on in […]

Konohawk stock review

July 18, 2017 Bill Marr 0

It’s a good time to be a rifleman. The level of innovation in the precision rifle market is at fever pitch. Twenty years ago, a rifleman could select a wood or fiberglass stock or a […]

Schmidt & Bender 5-25×56 PM II SFP Review

May 21, 2017 Bill Marr 0

Schmidt & Bender 5-25×56 PM II SFP Review For Police and Military use, the Schmidt & Bender PM II Police Marksman is considered the gold standard of extreme use rifle optics. The majority of high end […]

6.5 Grendel Review: 18″ Special Purpose Rifle

February 1, 2015 Bill Marr 0

The 6.5 Grendel was created as a 200-800 yard cartridge to fit into a standard AR-15 magazine. Based on the 220 Russian cartridge (the parent case utilized for the 7.62x39mm, 5.45x39mm and the 6PPC), the 6.5 […]

Modular Driven Technologies (MDT) HS3 Chassis Review: Part 2 Shooting the MDT HS3 Chassis System

January 25, 2015 Bill Marr 0

The HS3 is Modular Driven Technologies (MDT) newest chassis for Remington 700 short action rifles. The foundation of the system is an aluminum frame that adds a detachable box magazine and accepts AR-15/M16 M4 stocks […]

Modular Driven Technologies (MDT) HS3 Chassis Review: Initial Thoughts

January 24, 2015 Bill Marr 0

First impressions of the Modular Driven Technologies (MDT) HS3 Chassis system. I’ve been using Modular Driven Technologies Chassis systems for nearly four years. Their first model, the TAC21 houses a Remington M700 in an aluminum chassis, […]

Spuhr Ideal Scope Mount System (ISMS)

August 1, 2014 Bill Marr 0

I’ve been using the Spuhr Ideal Scope Mount System (ISMS) on my rifle for the past two years. Equipped with a Picatinny rail interface, the ISMS is machined from a single billet of 7075 Aluminum […]