We’ve been getting a lot of requests to build what we would consider a good general purpose AR15 upper receiver. With a focus on durability, reliability and ease of maintenance this is what we came up with, our own M4gery!
Equipped with a cold hammer forged chrome lined Daniel Defense M4 contour barrel and a carbine length gas system, parts for this upper will be easy to find down the line. Coupled with the Lite Rail 9.5 FSP, the shooter will have a similar firing grip to a mid length gun. The CSAT and tritium iron sights provide the shooter to engage point targets up close, as well as distant targets without changing his stock weld. The 2MOA Aimpoint T1 similarly provides a rapid aiming solution for up close targets, while providing a refined aiming point for far engagements while the Surefire Mini Scout Slight provides the ability to illuminate targets in low light conditions.
Compliment this upper with your collapsible stock lower, and you are ready to roll!
We began by ordering the following parts from Brownells:
Rifleshooter.com teams up with Brownell’s to update an old AR-15 The following article chronicles our build and is for informational purposes only. Reflecting on the round count for the carbine I am currently shooting, […]
Lately, the most prolific and talked about 223/5.56mm alternative found in ARs, is the 300 AAC Blackout. The 300 ACC Blackout utilizes a .223 parent case shortened to 1.368″ and necked up to accept .308″ diameter bullets. […]
Rifleshooter.com AR15 Upper Receiver Build: The following chronicles rifleshooter.com’s upper receiver build. It is presented for information purposes only. Have a certified gunsmith inspect and check any work prior to attempting to fire. […]
You must be logged in to post a comment.