A shortened stock is one of the more common firearm modifications encountered. Often a shooter will need a shorter length-of-pull because he or she has a smaller frame, is younger, or wants a faster handling firearm. In some applications, such as law enforcement, where officers wear thick protective vests, a short stock allows the firearm to be shouldered quickly.
I decided to reduce the length-of-pull on this Remington 870 Express 20-gauge shotgun. The length-of-pull was too long for quick handling so I decided to shorten the stock by 1″ and install a Limbsaver recoil pad.
As always, I start by verifying the shotgun is safe and empty.
The contents of Rifleshooter.com are produced for informational purposes only and should be performed by competent gunsmiths only. Rifleshooter.com and its authors,do not assume any responsibility, directly or indirectly for the safety of the readers attempting to follow any instructions or perform any of the tasks shown, or the use or misuse of any information contained herein, on this website.
Having the right tools makes this a quick and professional looking project.
Remington recently sent us a Remington Express Synthetic Express shotgun, model 25549, with a bead sighted 18″ IC barrel. While its a perfectly serviceable gun from the factory, we couldn’t wait to work on it and contacted Brownells to order a […]
Lengthening (Extending) a shotgun’s forcing cone The forcing cone is the tapered area just forward of the chamber that allows the shot an area in which to transition into the bore. As the shot then […]