When I found out Sierra was introducing .308″ diameter 195 grain Tipped MatchKings (TMK) I was thrilled to get my hands on some. Â The weight was an interesting choice, heavy for a 308 Winchester (Win) […]
Sierra 195 gr. Tipped MatchKing (TMK) REVIEW and load development: 308 Winchester and IMR 4064 Sierra recently expanded the Tipped MatchKing (TMK) line with the introduction of a 195 grain .308 diameter bullet #7795. Â […]
In this post I’ll be machining a golf ball pattern into the top of a 1911 slide. Â This pattern will match the golf ball texture on the grip and main spring housing, giving the pistol […]
Perhaps the biggest disadvantage of 1911 pistol is the shape of it’s butt. Â The square edge can print when the pistol is carried concealed. Â To address this, Ed Brown designed a Bobtail conversion mainspring housing […]
Countersunk and flush cut slide stop pins have become common on custom 1911s over the past few years. Â This simple modification adds a distinctive touch to a 1911 frame. For reference purposes, a schematic of […]
The expanding popularity of precision rifles has been accompanied by discussion about abandoning the 308 Winchester in favor of the 6.5 Creedmoor.  But what about the other match calibers out there?  Specifically 6.5×47 Lapua, 260 Remington, 243 […]
Kynshot manufactures hydraulic recoil reduction buffer systems for AR-15/M16 M4 type rifles and shotguns. Â A big fan of the Remington 870, I decided to see what this system has to offer. Kynshot sent a SK5100R […]
Hot and sweaty or cold and numb hands can make grasping your 1911 pistol difficult, especially if it has the original specification smooth front strap. Â The addition of checkering, texturing, rubber grips or grip tape […]
In the short time since its introduction, the Ruger Precision Rifle (RPR) has become established in the shooting industry. Â While there have been precision rifles in similar setups available for years, what made the Ruger […]
Custom 1911 Project: Part 7- machining ball cuts on a 1911 slide, presented by Rifleshooter.com and Brownells This is the seventh installment of our Custom 1911 project- in this post we are going to machine ball cuts […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.