Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
First impressions of the Modular Driven Technologies (MDT) HS3 Chassis system. I’ve been using Modular Driven Technologies Chassis systems for nearly four years. Their first model, the TAC21 houses a Remington M700 in an aluminum chassis, […]
Shooting the FBI Pistol Qualification Course I take shooting seriously. I go to the range for a purpose. When I shoot a precision rifle it may be to develop a load or prepare for a […]
For shooters living in areas limited to 5 or 10 round magazines for their AR-15/M16, Brownells has answered the call with 5 and 10 round capacity,223/5.56mm magazines, equipped with an extended floor plate that has the […]
The Harris bipod is widely viewed as the benchmark for precision rifle use. Most shooters prefer the “S” version with a swivel base for shooting on uneven ground. The big downside to the factory configured “S” version, […]
The Modular Driven Technologies (MDT) LSS chassis system offers Remington 700, Model Seven, Savage, Tikka T3 and Mossberg MVP shooters the ability to upgrade their rifle to a chassis system that uses a detachable magazine […]
In this post I’ll be turning a straight taper on a rifle barrel. The barrel is an unturned (straight 1.250″ diameter) gunsmith blank. A straight taper is the easiest taper to cut on a barrel. […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.