September 14, 2026
rifleshooter.com

rifleshooter.com

Bill Marr's journal of shooting, reloading and gunsmithing

  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
What's new?
  • [ January 26, 2025 ] 782 Custom Gunworks “HUNDO” Loading Block Editorial
  • [ January 26, 2025 ] How do rifle suppressors affect muzzle velocity? Precision Rifles
  • [ May 31, 2023 ] The A-Team Mini-14? Customizing a Ruger Mini-14 A-Team
  • [ April 30, 2023 ] Removing stripped and sheared screws from a rifle Gunsmithing
  • [ February 28, 2023 ] Cut and Crown a Winchester 94 30-30 Gunsmithing
HomeReloading

Reloading

6.5 Creedmoor

6.5 Creedmoor load development: 16.5 inch barrel, 123 SMK and 140 SMK

March 28, 2016 Bill Marr 0

6.5 Creedmoor 16.5″ barrel load development for the 123 grain Sierra MatchKing (SMK) and 140 grain Sierra MatchKing (SMK) When I rebuilt my Savage 10 FCP-SR into a custom 6.5 Creedmoor, I settled on a […]

7.62x39

Ammunition concentricity and accuracy: Testing the effect of run-out on precision

February 8, 2016 Bill Marr 0

What is cartridge concentricity?  Cartridge concentricity is how straight a cartridge is along it’s center axis.  The straighter the round, the lower the concentricity. Ammunition concentricity is measured using a method called Total Indicator Runout (T.I.R.)- sometimes […]

Precision Rifles

308 Winchester 175 Sierra MatchKing and IMR 4064 load development

January 11, 2016 Bill Marr 0

308 Winchester load development with the Sierra 175 grain MatchKing (SMK) and IMR 4064 Powder. In this post, I’ll be developing a load for my M40A3 clone.  Built on a customized Remington 700 receiver, the […]

6.5 Creedmoor

Lapua 6.5 Creedmoor Brass: Forming 6.5 Creedmoor cases from 22-250 brass

November 2, 2015 Bill Marr 0

Use of the 260 Remington in shooting competitions helped introduce a generation of US rifle competitors to 6.5mm cartridges.  While long appreciated in Europe, the 6.5mm has developed a strong following on this side of the Atlantic. […]

6.5 Creedmoor

6.5 Creedmoor load development: 142 grain Sierra MatchKing with Reloader 17 and W760

October 5, 2015 Bill Marr 0

6.5 Creedmoor load development: 142 grain Sierra MatchKing with Reloader 17 and W760 The Sierra 142 grain MatchKing is a popular bullet for 6,5mm shooters.  According to Sierra, the 142 grain SMK has a sectional […]

Reloading

How to remove a stuck case from a sizing die

September 21, 2015 Bill Marr 0

There are two types of reloaders, those who’ve had a case stuck in a die, and those who haven’t yet.  While the pistol reloaders may not experience it as much as the rifle guys, invariably, […]

6.5 Creedmoor

6.5 Creedmoor reloading: Effects of cartridge overall length (OAL) on 142 gr Sierra MatchKing

September 7, 2015 Bill Marr 0

I’ve had great luck with the 142 grain Sierra MatchKing (SMK) in my custom rifle chambered in 6.5 Creedmoor.  A few posts I’ve read on various forums reported exceptional accuracy with short cartridge lengths placing […]

6.5 Creedmoor

6.5 Creedmoor 123 Sierra MatchKing (SMK) HPBT load development with H4350 and Varget

August 25, 2015 Bill Marr 0

I worked up some loads for my custom 22″ barrel 6.5 Creedmoor precision rifle using Sierra’s 123 Grain MatchKing (SMK) HPBT with Hodgdon Varget and H4350 powder. According to Sierra, the 123 grain SMK has a […]

6.5 Creedmoor

6.5 Creedmoor 142 Sierra MatchKing (SMK) H4350 Load Development

August 6, 2015 Bill Marr 0

I worked up some loads for my custom 6.5 Creedmoor precision rifle with a 22″ barrel using Sierra’s 142 Grain MatchKing (SMK) HPBT and Hodgdon H4350 powder.     According to Sierra, the 142 grain […]

6.5 Creedmoor

6.5 Creedmoor 136 grain Scenar-L OTM Load Development, H4350

August 1, 2015 Bill Marr 0

I’ve taken a few trips to the range developing a load for my 22″ barrel 6.5 Creedmoor precision rifle. The rifle is built with the following components from Brownells: Surgeon 591 action Bartlein 6.5mm 1:8 […]

Posts pagination

« 1 … 5 6 7 »

Like us on Facebook!

Subscribe to rifleshooter.com via Email!

Never miss a post! Enter your email address to subscribe and receive notifications of new posts by email.

Texturing a fiberglass stock

Gunsmithing
February 1, 2017 0

Fulton Armory M14 receiver

Rifles
March 25, 2018 0

243 Winchester- Effect of barrel length on velocity

Barrel length
April 19, 2016 0

Review: Howa MINIACTION 7.62×39

7.62x39
April 1, 2017 0

HOWA Chassis Rifle (HCR) review

Howa 1500
February 6, 2017 0
6.5 Creedmoor- Effect of Barrel Length on Velocity: Cutting up a Creedmoor!
308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28" to 16.5")
Budget precision rifle: Customizing the Savage Axis
223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches
Ruger American Rifle Predator 223 Review
300 Winchester Magnum: How Does Barrel Length Change Velocity- A 16" 300 Win Mag?
Building a Custom Ruger American Rifle
Howa 1500 barreled action review: Howa 1500 versus Remington 700
16.5 Inch 308 Winchester Precision Rifle: Summary of a Short Rifle
6.5 Creedmoor- Effects of Barrel Length on Velocity 2019

How to flute a rifle barrel

Carbine Basics: How should I set my gun up?

Remington 870 Tactical Shotgun Build

Review: Shooting the MAGPUL Ruger 10/22 Hunter X-22 Stock


 

 

 

 

 

Remington 870 ejector spring replacement

April 6, 2019 0

Gunsmithing basics: Tapping a blind hole

June 24, 2018 0

IWI US Tavor

January 19, 2013 0

Back bore a shotgun

August 5, 2015 0

Brownells AR-15 10 Round Magazines

January 11, 2015 0

Remington 870 extractor identification: MIM v. bar stock

April 29, 2018 0

Smith and Wesson K-Frame revolver barrel removal and installation

November 24, 2019 0

Building a custom Remington 700 hunting rifle

October 26, 2015 0

Worst case scenario: pin and screw removal-EDM machining in gunsmithing

October 2, 2018 0

Building a custom sawed-off shotgun

November 22, 2020 0

Posts

Pages
  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
  • Reviews
  • Rifles
  • Training
  • Optics
  • Hunting
  • Classic Rifleshooter.com
  • Bullet Selection
  • Cartridge Selection
  • Handguns
  • Contact us
  • Standards
  • Custom 870 Build
  • Project Guns- Gunsmithing articles and posts
  • Disclaimer
  • Rifles
  • Reviews
  • Gunsmithing
  • Tutorial
  • Accessories
  • Shotguns
  • New
  • Optics
  • Carbine Basics
  • Barrel Length and Velocity
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Recent Posts
  • 782 Custom Gunworks “HUNDO” Loading Block
  • How do rifle suppressors affect muzzle velocity?
  • The A-Team Mini-14? Customizing a Ruger Mini-14
  • Removing stripped and sheared screws from a rifle
  • Cut and Crown a Winchester 94 30-30
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized

Loading Comments...

You must be logged in to post a comment.