My buddy (the lefty) has had nothing but heartache with his custom 260 Remington rifle. This was the first custom precision rifle that he commissioned 10 years ago. He used quality components; a Nesika Model […]
When you chamber (or fit) a barrel blank to a rifle you have to cut it on a lathe. There are two basic ways to do this: one is to mount the barrel blank through the […]
Often high-volume shooters will re-chamber or set back a used barrel. Most do it to change calibers or give a worn throat new life. You need to have enough barrel shank to set back a […]
Parker Otto (P.O.) Ackley was a well known author and gunsmith who improved standard metallic cartridges by decreasing the body taper and increasing the shoulder angle. These changes provided increased case capacity and increased ballistic […]
Custom Remington 700 Build: Our twist on a light tactical rifle Custom Remington 700 Build: We were looking to build a compact 20″ 308 capable of sustained sub-minute of an angle performance. This is an […]
Chambering a rifle barrel. In this article, we thread and chamber a barrel blank to install on the action we previously blueprinted. We will reference an action worksheet developed by Brownells, which is available for download here. Note: I […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.