July 4, 2022
rifleshooter.com

rifleshooter.com

Bill Marr's journal of shooting, reloading and gunsmithing

  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
What's new?
  • [ June 25, 2022 ] Building a custom 7mm Rem Mag Hunting Rifle-PART 1 Gunsmithing
  • [ May 21, 2022 ] Sig Sauer MPX Review Pistols
  • [ April 29, 2022 ] Building a Custom 308 Precision Chassis Rifle- PART 3- Cutting the chamber, final assembly and test fire 308 Winchester
  • [ February 16, 2022 ] Building a Custom 308 Precision Chassis Rifle – PART 2- Barrel preparation and threading 308 Winchester
  • [ February 7, 2022 ] Customizing a Savage B.Mag Target Rifle Gunsmithing
HomeH4350

H4350

Barrel length and velocity

6 Creedmoor: Effects of barrel length on muzzle velocity

May 5, 2019 Bill Marr 0

The 6 Creedmoor offers shooters softer recoil and quicker follow up shots when compared to the 6.5 Creedmoor. Back in January 2017, I wrote 6 Creedmoor barrel length versus muzzle velocity (31 to 17 inches), […]

6.5 Creedmoor

6.5 Creedmoor Load Development: Short barrel (16.5″) suppressed and non-suppressed load development, 147 ELD and H4350

December 2, 2018 Bill Marr 0

I’ve written quite a bit about short barrelled precision rifles.  On this blog, I’ve built a variety of 308 Winchester, 223 Remington, 243 Winchester, 338 Lapua and 6.5 Creedmoor rifles with barrels in the 16-17 […]

6.5 Creedmoor

Ruger Precision Rifle Suppressed Load Development: Hornady 147 ELD-Match and H4350 with THUNDER CHICKEN

October 4, 2018 Bill Marr 0

Ruger Precision Rifle Suppressed Load Development: Hornady 147 ELD-Match and H4350 Suppressors are here to stay.  What was once a novelty in the precision rifle world has grown increasingly common.  You’d be hard pressed to […]

6.5 Creedmoor

6.5 Creedmoor load development: Hornady 147 ELD with H4350 and H4831SC

July 27, 2018 Bill Marr 0

6.5 Creedmoor load development: Hornady 147 ELD with H4350 and H4831SC Hornady bullets are popular with the 6.5 Creedmoor crowd.  While I’ve mostly been shooting Sierra, a few readers have asked about the Hornady.  I […]

6.5 Creedmoor

6.5 Creedmoor load development: Semi-automatic gas gun, 123 and 142 SMK

January 15, 2018 Bill Marr 0

6.5 Creedmoor load development: Semi-automatic gas gun, 123 and 142 SMK The majority of cartridges in existence tend to find themselves chambered in certain types of firearms.  While there are exceptions, you’d expect to find […]

6.5 Creedmoor

6.5 Creedmoor loads: 6.5 mm 150 gr. Sierra MatchKing (SMK)

October 14, 2017 Bill Marr 0

6.5 Creedmoor loads: 6.5 mm 150 gr. Sierra MatchKing (SMK)- go long! Sierra Bullets sent me some bullets that were so new they had literally just come straight off of the press.  Sworn to secrecy, […]

6 Creedmoor

Review: Ruger American Rifle Predator 6 Creedmoor

March 18, 2017 Bill Marr 0

Review: Ruger American Rifle Predator 6 Creedmoor In this post, I take a look at the Ruger American Rifle. The Ruger American Rifle was introduced in 2011.  I’ve owned a few Ruger M77s over the […]

6 Creedmoor

Sierra 6mm 110 SMK, 6 Creedmoor and 6×47 Lapua: initial impressions/load development

December 18, 2016 Bill Marr 0

Game changer?  Sierra’s new 6mm 110 grain MatchKing #1575 When Sierra Bullets introduced the new 6mm (.243″) 110 grain MatchKing (SMK) a few weeks ago the 6mm shooting community was excited.  With an advertised G1 […]

6 Creedmoor

Ultimatum Precision U300 bolt action review: Initial impressions

December 3, 2016 Bill Marr 0

I first heard of the U300 back in February when Ultimatum Precision approached me about reviewing their new, three-lug action.  Looking at the CAD drawing they provided, I was impressed and couldn’t wait to get my […]

6 Creedmoor

6 Creedmoor: Review and load development

August 29, 2016 Bill Marr 0

6 Creedmoor review and loads A few years ago the movement towards 6.5mm match cartridges was in full swing, and while the 6.5 Creedmoor has gained a solid foothold, match shooters are now migrating to […]

Posts navigation

1 2 »

Like us on Facebook!

Subscribe to rifleshooter.com via Email!

Never miss a post! Enter your email address to subscribe and receive notifications of new posts by email.

6.5 Creedmoor 123 Sierra MatchKing (SMK) HPBT load development with H4350 and Varget

6.5 Creedmoor
August 25, 2015 0

Brownells Gunsmith Conference and Career Fair

Gunsmithing
April 21, 2013 0

Customizing the 1911: machining a golf ball pattern slide

1911 gunsmithing
November 7, 2016 0

Building a Custom 6.5 Creedmoor Precision Rifle

6.5 Creedmoor
July 4, 2015 0

7 Tactical shotgun upgrades

Shotguns
July 27, 2013 0
223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches
308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28" to 16.5")
6.5 Creedmoor- Effect of Barrel Length on Velocity: Cutting up a Creedmoor!
7.62x39 mm Russian: Effect of barrel length on muzzle velocity
Budget precision rifle: Customizing the Savage Axis
Shooting the New Jersey State Police Pistol Qualification HQC1
Ruger American Rifle Predator 223 Review
308 Winchester/ 7.62x51mm NATO Short barrel length and velocity- A six inch 308 bolt gun?
223 Ackley Improved (223AI) loads and review: A better 223?
300 Winchester Magnum: How Does Barrel Length Change Velocity- A 16" 300 Win Mag?

Building a 9mm Bolt Action Rifle

GRS Berserk stock review

Back when Sears sold a Mauser: The J.C. Higgins Model 51

Muzzle brake shock waves in the sand


 

 

 

 

This image has an empty alt attribute; its file name is TRACT-34MM.jpg

 

Special Purpose Rifle (SPR) Upper Receiver Build

August 22, 2012 0

Building a custom 260 Remington precision rifle

November 14, 2013 0

What’s in your range bag?

April 7, 2018 0

Olongapo Outfitters AR-15 30 Round Grab & Go

July 15, 2011 0

USMC M40A5 Build-Part 2: Lug slotting the receiver

April 19, 2015 0

Truing The Bolt On A Remington 700

November 3, 2013 0

Installing a pre-fit barrel on a Remington 700

August 26, 2017 0

Customizing a Savage B.Mag Target Rifle

February 7, 2022 0

Texturing a fiberglass stock

February 1, 2017 0

External Remington 700 bolt stop- no step cut installation- method 2

July 18, 2013 0

Posts

Pages
  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
  • Reviews
  • Rifles
  • Training
  • Optics
  • Hunting
  • Classic Rifleshooter.com
  • Bullet Selection
  • Cartridge Selection
  • Handguns
  • Contact us
  • Standards
  • Custom 870 Build
  • Project Guns- Gunsmithing articles and posts
  • Disclaimer
  • Rifles
  • Reviews
  • Gunsmithing
  • Tutorial
  • Accessories
  • Shotguns
  • New
  • Optics
  • Carbine Basics
  • Barrel Length and Velocity
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Recent Posts
  • Building a custom 7mm Rem Mag Hunting Rifle-PART 1
  • Sig Sauer MPX Review
  • Building a Custom 308 Precision Chassis Rifle- PART 3- Cutting the chamber, final assembly and test fire
  • Building a Custom 308 Precision Chassis Rifle – PART 2- Barrel preparation and threading
  • Customizing a Savage B.Mag Target Rifle
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized

 

Loading Comments...
 

You must be logged in to post a comment.