November 19, 2026
rifleshooter.com

rifleshooter.com

Bill Marr's journal of shooting, reloading and gunsmithing

  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
What's new?
  • [ January 26, 2025 ] 782 Custom Gunworks “HUNDO” Loading Block Editorial
  • [ January 26, 2025 ] How do rifle suppressors affect muzzle velocity? Precision Rifles
  • [ May 31, 2023 ] The A-Team Mini-14? Customizing a Ruger Mini-14 A-Team
  • [ April 30, 2023 ] Removing stripped and sheared screws from a rifle Gunsmithing
  • [ February 28, 2023 ] Cut and Crown a Winchester 94 30-30 Gunsmithing
HomeSpuhr

Spuhr

6.5 Creedmoor

Building a custom Savage Model 10 in 6.5 Creedmoor

March 21, 2016 Bill Marr 0

Savage Arms manufactures accurate rifles.  My Savage Model 10 FCP-SR wasn’t the best out of the box, changing the factory stock for a MDT LSS chassis system made the gun shoot significantly better.   Always […]

6.5 Creedmoor

6.5 Creedmoor- Effect of Barrel Length on Velocity: Cutting up a Creedmoor!

February 22, 2016 Bill Marr 0

Since its introduction by Hornady in 2007, the 6.5 Creedmoor (sometimes shortened to Creed) has established a strong foothold in the US rifle market.  The 6.5 Creedmoor balances the excellent external ballistics of .264″ diameter bullets […]

Barrel length

308 Winchester/ 7.62x51mm NATO Short barrel length and velocity- A six inch 308 bolt gun?

February 1, 2016 Bill Marr 0

I woke up early that morning.  It was only a few days after a historic blizzard passed through my state.  Stir crazy, I couldn’t wait to get outside.  The chill from my snow covered feet […]

Precision Rifles

308 Winchester 175 Sierra MatchKing Ladder Test with Varget and IMR 4064

February 6, 2015 Bill Marr 0

I often utilize traditional methods to develop hand loads for my rifles.  Normally, I’ll load five rounds of a given charge in .3 grain increments for a given powder (some shooters load 3, or 6, for […]

Cartridge Selection

6.5 Grendel Review: 18″ Special Purpose Rifle

February 1, 2015 Bill Marr 0

The 6.5 Grendel was created as a 200-800 yard cartridge to fit into a standard AR-15 magazine.  Based on the 220 Russian cartridge (the parent case utilized for the 7.62x39mm, 5.45x39mm and the 6PPC), the 6.5 […]

Barrel length

308 Winchester Barrel Length and Velocity: Winchester 147 grain FMJ

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

7.62x51mm NATO (308 Win) Barrel Length and Velocity: IMI Samson 150 grain FMJ

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester Barrel Length and Velocity: Federal 168 grain Gold Medal BTHP

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester Barrel Length and Velocity: Winchester Super X 180 grain Power-Point

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″)

December 27, 2014 Bill Marr 0

308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″) Introduction Released by Winchester in 1952 (and adopted by NATO in 1954 as the 7.62x51mm NATO), the 308 Winchester has gained universal acceptance amongst […]

Posts pagination

« 1 2 3 »

Like us on Facebook!

Subscribe to rifleshooter.com via Email!

Never miss a post! Enter your email address to subscribe and receive notifications of new posts by email.

TS Customs Quick Adjust Knob for KMW Loggerhead Cheekpiece

Accessories
September 2, 2017 0

Remington 870 3-Gun Competition Shotgun Conversion

Competition
July 29, 2012 0

1911 Front sight Installation

Gunsmithing
April 1, 2013 0

Remington 870 v Mossberg 500 v Mossberg 590: Comparative design notes

Shotguns
September 10, 2017 0

Building a Custom 308 Precision Chassis Rifle – PART 2- Barrel preparation and threading

308 Winchester
February 16, 2022 0
Budget precision rifle: Customizing the Savage Axis
6.5 Creedmoor- Effect of Barrel Length on Velocity: Cutting up a Creedmoor!
308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28" to 16.5")
223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches
300 Winchester Magnum: How Does Barrel Length Change Velocity- A 16" 300 Win Mag?
243 Winchester- Effect of barrel length on velocity
Remington Model 4, 742, 7400 disassembly notes
Ruger American Rifle Predator 223 Review
Howa 1500 barreled action review: Howa 1500 versus Remington 700
Review: Remington 700 SPS Varmint

Does red dot brightness (and bloom) change point of impact?

External Remington 700 bolt stop- no step cut installation- method 2

Building a Custom 308 Precision Chassis Rifle- PART 1, Barrel removal, action blueprinting

Chambering a rifle for an Ackley Improved Cartridge


 

 

 

 

 

Great rifles that got away: Remington 700 Titanium

June 1, 2017 0

The A-Team Mini-14? Customizing a Ruger Mini-14

May 31, 2023 0

Barreling a Winchester Model 70 with a Remington 700 sporter barrel

April 8, 2017 0

USMC M40A5 Build- Part 4: Threading and chambering the barrel and brake installation

July 13, 2015 0

Metallic Cartridge Case Preperation Made Easy: Sinclair Power Center Review

December 6, 2013 0

Building a 9mm Bolt Action Rifle

October 27, 2019 0

Savage smooth barrel nut removal

May 5, 2019 0

Remington 700 Rebuild: Transforming a Factory 700 AAC Rifle to a Custom Precision Rifle

November 29, 2013 0

Refreshing a poorly machined Remington 700 action

July 19, 2014 0

Cerakote tip: Clean out your ejector hole before final assembly

July 26, 2014 0

Posts

Pages
  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
  • Reviews
  • Rifles
  • Training
  • Optics
  • Hunting
  • Classic Rifleshooter.com
  • Bullet Selection
  • Cartridge Selection
  • Handguns
  • Contact us
  • Standards
  • Custom 870 Build
  • Project Guns- Gunsmithing articles and posts
  • Disclaimer
  • Rifles
  • Reviews
  • Gunsmithing
  • Tutorial
  • Accessories
  • Shotguns
  • New
  • Optics
  • Carbine Basics
  • Barrel Length and Velocity
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Recent Posts
  • 782 Custom Gunworks “HUNDO” Loading Block
  • How do rifle suppressors affect muzzle velocity?
  • The A-Team Mini-14? Customizing a Ruger Mini-14
  • Removing stripped and sheared screws from a rifle
  • Cut and Crown a Winchester 94 30-30
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized

Loading Comments...

You must be logged in to post a comment.