I often utilize traditional methods to develop hand loads for my rifles. Normally, I’ll load five rounds of a given charge in .3 grain increments for a given powder (some shooters load 3, or 6, for […]
The 6.5 Grendel was created as a 200-800 yard cartridge to fit into a standard AR-15 magazine. Based on the 220 Russian cartridge (the parent case utilized for the 7.62x39mm, 5.45x39mm and the 6PPC), the 6.5 […]
British SS109 5.56mm Ammunition: Cartridge, Caliber 5.56mm, Ball, L2A2 (United Kingdom) Under STANAG 4172 (standardization agreement)5.56x45mm NATO is the standard intermediate cartridge chambering for NATO forces. SS109 NATO (known as M855 in the United States) […]
The HS3 is Modular Driven Technologies (MDT) newest chassis for Remington 700 short action rifles. The foundation of the system is an aluminum frame that adds a detachable box magazine and accepts AR-15/M16 M4 stocks […]
When I posted How to taper a rifle barrel, I had worked on a barrel that had been previously chambered. Normally, if someone was tapering a barrel, it would be an unturned blank that has not […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
First impressions of the Modular Driven Technologies (MDT) HS3 Chassis system. I’ve been using Modular Driven Technologies Chassis systems for nearly four years. Their first model, the TAC21 houses a Remington M700 in an aluminum chassis, […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.