I worked up some loads for my custom 22″ barrel 6.5 Creedmoor precision rifle using Sierra’s 123 Grain MatchKing (SMK) HPBT with Hodgdon Varget and H4350 powder. According to Sierra, the 123 grain SMK has a […]
First produced by Ruger in 1964, the Ruger 10/22 semiautomatic 22 rifle has proven to be extremely popular with shooters. To date, more than 5 million have been produced. The first rimfire rifle I personally […]
In this post I’ll be modifying a Remington 870 barrel that came on a Police trade-in shotgun. This smooth-bore 20″ barrel is equipped with rifle sights from the factory. It will be cut and crowned […]
In this post we will take a look at a budget shotgun rebuild/conversion. The goal of this project is bringing new life to a beat up old gun. The shotgun featured is a Mossberg 500 I […]
I worked up some loads for my custom 6.5 Creedmoor precision rifle with a 22″ barrel using Sierra’s 142 Grain MatchKing (SMK) HPBT and Hodgdon H4350 powder. According to Sierra, the 142 grain […]
How do you back bore a shotgun barrel? In Understanding shotgun back bore, I discussed what back bore was and how it affected patterning of shotguns. In this post, we will look at how to back […]
My introduction to red dot sights came in the mid-90s. I was working at the range in the Marine Corps Air Ground Combat Center (MCAGCC) in 29 Palms, California. My Gunny came up to me […]
I came across a brass sale at Brownells. I’m a pretty cheap guy so it caught my attention. I just ordered a bunch. Here is a link…
This is a custom Remington 700 precision rifle I built with my friend. It is a collection of old and new parts. New parts purchased were a Remington 700 Left-Hand short action receiver with .308 bolt […]
I’ve taken a few trips to the range developing a load for my 22″ barrel 6.5 Creedmoor precision rifle. The rifle is built with the following components from Brownells: Surgeon 591 action Bartlein 6.5mm 1:8 […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.