Finally, the weather broke and I got a chance to shoot my Remington 700 Remage conversion. If you didn’t read the installation post, take a look at Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel […]
I love my Bridgeport milling machine. When I noticed a small jump in my table during climb cutting operations I figured something was wrong. It turns out my Bridgeport milling machine had about .045″ of […]
Head over to the bolt action rifle section of any internet shooting forum and you are bound to stumble into the Savage and Remington rifle debate. While the Remington 700 is more refined (and expensive) […]
This is a fantastic video of Turnbull Restoration and Manufacturing restoring a vintage Winchester rifle. If you aren’t familiar with Turnbull, take a look at their site, their work is exquisite.
If you own a Remington 700 and want to work on it, you’ll need a way to remove the firing pin assembly from the bolt. One method is to use a coin in the slot […]
I’ve had my Grizzly 4003G Gunsmith’s lathe for approximately 2 years and love it. Since I use the lathe primarily for barrels, my work has been with a spider or 4-jaw chuck. I only mounted […]
I managed to get my hands on a real Remington M24 trigger (NSN: 1005015118314)! This is the correct trigger for a M24, M40A3 or M40A5, and one of the parts needed for the upcoming M40A5 […]
Anyone who has bedded a rifle knows the feeling of relief when they successfully removed their action from the stock after the epoxy has cured. Most guys, myself included, tap the action with a hammer, […]
To read Rifleshooter.com’s M40A5 Build Series, see: Remington 700 (USMC M40A1, M40A3, M40A5) Q&A: What is a clip slot? Lug slot? Lugged base? USMC M40A5 Build- Part 1: Gathering the Parts USMC M40A5 Build-Part 2: […]
I’ve gotten a lot of positive feedback about the fluted bolts on my custom Remington 700 builds. If you look at the action in the photo above, you’d probably be shocked to learn it […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.