September 4, 2026
rifleshooter.com

rifleshooter.com

Bill Marr's journal of shooting, reloading and gunsmithing

  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
What's new?
  • [ January 26, 2025 ] 782 Custom Gunworks “HUNDO” Loading Block Editorial
  • [ January 26, 2025 ] How do rifle suppressors affect muzzle velocity? Precision Rifles
  • [ May 31, 2023 ] The A-Team Mini-14? Customizing a Ruger Mini-14 A-Team
  • [ April 30, 2023 ] Removing stripped and sheared screws from a rifle Gunsmithing
  • [ February 28, 2023 ] Cut and Crown a Winchester 94 30-30 Gunsmithing
HomeBarrel length and velocity

Barrel length and velocity

7.62x39

7.62×39 mm Russian: Effect of barrel length on muzzle velocity

January 13, 2016 Bill Marr 0

In this post, Rifleshooter.com will be testing the effects of barrel length on velocity for the 7.62×39 mm Russian Cartridge. Chambered in the SKS and AK-47, the 7.62×39 mm Russian cartridge is well known throughout the world. […]

Barrel length

223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches

December 7, 2015 Bill Marr 0

Have you ever wondered how much barrel length effects muzzle velocity on your rifle?  Well I did, so I cut up rifles chambered in 223 Remington, 308 Winchester, 7 mm Remington Magnum and 300 Winchester Magnum […]

Barrel length

223 Remington/5.56mm NATO Barrel length versus Velocity- Short Barrels- 6 to 14 inches

November 18, 2015 Bill Marr 0

In 223 Remington/5.56 NATO, velocity versus barrel length: A man, his chop box and his friend’s rifle, we cut the barrel of a factory Remington 700 chambered in 223 Remington back one inch at a time […]

Barrel length

7mm Remington Magnum (7 Rem Mag) Barrel Length Versus Velocity

April 7, 2015 Bill Marr 0

7mm Remington Magnum (7 Rem Mag) Barrel Length Versus Velocity Since its introduction in 1962, the 7mm Remington Magnum (7 Rem Mag) has developed a strong following, becoming the most popular metric hunting cartridge in […]

Barrel length

Short and Loud: The 16 inch 308 Win Precision Rifle

February 13, 2015 Bill Marr 0

Short barreled 308 precision rifles are nothing new.  Even prior to the introduction of the DARPA XM3, 18.5″ 308s were in use with some forward thinking shooters.  GAP has marketed its popular 18.5″ 308, the […]

Barrel length

308 Winchester Barrel Length and Velocity: Winchester 147 grain FMJ

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

7.62x51mm NATO (308 Win) Barrel Length and Velocity: IMI Samson 150 grain FMJ

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester Barrel Length and Velocity: Federal 168 grain Gold Medal BTHP

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester Barrel Length and Velocity: Winchester Super X 180 grain Power-Point

January 24, 2015 Bill Marr 0

Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges.  The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]

Barrel length

308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″)

December 27, 2014 Bill Marr 0

308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28″ to 16.5″) Introduction Released by Winchester in 1952 (and adopted by NATO in 1954 as the 7.62x51mm NATO), the 308 Winchester has gained universal acceptance amongst […]

Posts pagination

« 1 2 3 »

Like us on Facebook!

Subscribe to rifleshooter.com via Email!

Never miss a post! Enter your email address to subscribe and receive notifications of new posts by email.

AR15/M16 Bolt Radius Scraper Review

Accessories
November 2, 2012 0

Trijicon HD Tritium Night Sight Review

Glock
June 7, 2015 0

Forster CO-AX reloading press: REVIEW- Is it the best press for precision rifle?

Reloading
March 12, 2017 0

Tactical Operations bolt knob installation on a Remington 700

Gunsmithing
March 14, 2017 0

338 Lapua Magnum: Barrel Length Versus Muzzle Velocity (30-17 inches)

Barrel length
March 5, 2017 0
6.5 Creedmoor- Effect of Barrel Length on Velocity: Cutting up a Creedmoor!
308 Winchester / 7.62x51mm NATO: Barrel Length versus Velocity (28" to 16.5")
223 Remington/ 5.56mm NATO barrel length and velocity: 26 inches to 6 inches
Budget precision rifle: Customizing the Savage Axis
16.5 Inch 308 Winchester Precision Rifle: Summary of a Short Rifle
Building a Custom Ruger American Rifle
M24 Sniper Rifle Review
Howa 1500 barreled action review: Howa 1500 versus Remington 700
7.62x39 mm Russian: Effect of barrel length on muzzle velocity
The A-Team Mini-14? Customizing a Ruger Mini-14

Review: Shooting a Glock with Trijicon RMR red dot sight

Palmetto PA-10 Review: How accurate is a $400 AR-10?

A look at how rifle barrels speed up: Measuring the increase of muzzle velocity in new barrels

Skim bedding and pillar installation on a Remington 700


 

 

 

 

 

Brownells AR-15 10 Round Magazines

January 11, 2015 0

Remington 700 offset external bolt stop installation

July 20, 2014 0

Custom Remington 870 Wingmaster Build

May 5, 2015 0

Eliminate milling machine backlash: Splitting a Bridgeport feed screw nut

March 7, 2015 0

Installing a recoil pad on a fiberglass stock

January 30, 2017 0

USMC M40A5 Build- Part 1: Gathering the Parts

February 16, 2015 0

Building a Custom 308 Precision Chassis Rifle- PART 1, Barrel removal, action blueprinting

January 23, 2022 0

Installing Novak’s sights on a Colt 380 Government (Mustang)

July 13, 2019 0

Customizing the 1911: machining a golf ball front strap

October 11, 2016 0

Building a Custom Remington 700 .308 Tactical Rifle

June 28, 2013 0

Posts

Pages
  • Contact us
  • Disclaimer
  • Project Guns- Gunsmithing articles and posts
  • Reviews
  • Rifles
  • Training
  • Optics
  • Hunting
  • Classic Rifleshooter.com
  • Bullet Selection
  • Cartridge Selection
  • Handguns
  • Contact us
  • Standards
  • Custom 870 Build
  • Project Guns- Gunsmithing articles and posts
  • Disclaimer
  • Rifles
  • Reviews
  • Gunsmithing
  • Tutorial
  • Accessories
  • Shotguns
  • New
  • Optics
  • Carbine Basics
  • Barrel Length and Velocity
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Recent Posts
  • 782 Custom Gunworks “HUNDO” Loading Block
  • How do rifle suppressors affect muzzle velocity?
  • The A-Team Mini-14? Customizing a Ruger Mini-14
  • Removing stripped and sheared screws from a rifle
  • Cut and Crown a Winchester 94 30-30
Meta
  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org

All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized

Loading Comments...

You must be logged in to post a comment.