This is a custom Remington 700 precision rifle I built with my friend. It is a collection of old and new parts. New parts purchased were a Remington 700 Left-Hand short action receiver with .308 bolt […]
I’ve taken a few trips to the range developing a load for my 22″ barrel 6.5 Creedmoor precision rifle. The rifle is built with the following components from Brownells: Surgeon 591 action Bartlein 6.5mm 1:8 […]
This is Part 4 of Rifleshooter.com’s USMC M40A5 build. So far, we’ve gathered the parts, lug slotted and trued the receiver for Rifleshooter.com’s USMC M40A5 build. In this post I’ll be fitting the Schneider […]
The flat shooting and light recoiling 6.5 Creedmoor was introduced by Hornady in 2007. Based on a 308 Winchester case, the 6.5 mm (.264″) Creedmoor fits inside an AR10/ 308 AR platform and feeds well […]
The .30 Caliber/7.62MM (.308) 175 Grain HPBT Sierra MatchKing (SMK) is the gold standard for 308 Winchester precision rifle shooters. In January 2015, Sierra introduced a .30 Caliber/7.62MM (.308) 175 Grain HPBT Tipped MatchKing (TMK) […]
USMC M40A5 Build- Part 3: Receiver Truing, is the third part of Rifleshooter.com’s series, USMC M40A5 Build. With a goal of cloning the USMC M40A5 (M40A3) sniper rifle, USMC M40A5 Build- Part 1: Gathering the Parts, […]
USMC M40A5 Build-Part 2: Lug slotting the receiver USMC M40A5 Build- Part 1: Gathering the Parts provided an overview of the parts required to complete an M40A5 (or M40A3). In Part 2 of this series, the receiver […]
In this post, we’ll build a custom Remington 700 chambered in 6.5×47 Lapua. First, a little history on this project. My buddy managed to score a great deal on a used McMillian HTG stock inletted […]
I headed to the range with the Remington 700 Remage conversion in 6mm BR Norma (6BR) to gather some more accuracy data. If you didn’t read the Remage barrel installation post, take a look at Rebarrel a […]
Finally, the weather broke and I got a chance to shoot my Remington 700 Remage conversion. If you didn’t read the installation post, take a look at Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.