USMC M40A5 Build-Part 2: Lug slotting the receiver USMC M40A5 Build- Part 1: Gathering the Parts provided an overview of the parts required to complete an M40A5 (or M40A3). In Part 2 of this series, the receiver […]
In this post, we’ll build a custom Remington 700 chambered in 6.5×47 Lapua. First, a little history on this project. My buddy managed to score a great deal on a used McMillian HTG stock inletted […]
7mm Remington Magnum (7 Rem Mag) Barrel Length Versus Velocity Since its introduction in 1962, the 7mm Remington Magnum (7 Rem Mag) has developed a strong following, becoming the most popular metric hunting cartridge in […]
Chamber Reamers Let’s take a look at chamber reamers for metallic cartridges. If you are new to gunsmithing, or a serious firearms enthusiast, this post will help enhance your understanding of these important tools. What […]
Chamber options when barreling a Remington 700 receiver are limited by action length and the inside diameter of the bolt face. If the action has a 223 (.384″) bolt face, that means 308 (.473″) or […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.