In this post, we’ll build a custom Remington 700 chambered in 6.5×47 Lapua. First, a little history on this project. My buddy managed to score a great deal on a used McMillian HTG stock inletted […]
Chamber options when barreling a Remington 700 receiver are limited by action length and the inside diameter of the bolt face. If the action has a 223 (.384″) bolt face, that means 308 (.473″) or […]
I headed to the range with the Remington 700 Remage conversion in 6mm BR Norma (6BR) to gather some more accuracy data. If you didn’t read the Remage barrel installation post, take a look at Rebarrel a […]
Finally, the weather broke and I got a chance to shoot my Remington 700 Remage conversion. If you didn’t read the installation post, take a look at Rebarrel a Remington 700 without a lathe: McGowen’s Remage barrel […]
Head over to the bolt action rifle section of any internet shooting forum and you are bound to stumble into the Savage and Remington rifle debate. While the Remington 700 is more refined (and expensive) […]
In the world of precision rifles, military firearms and Remington 700s, the terms clip slot, lug slot and lugged base often come up. A clip slot, historically found on a wide range of firearms (take a […]
If you work on round action receivers like the Remington 700, a receiver v-block, or fixture, is useful. Receiver fixtures allow you to properly index the action in your milling machine, as well as secure […]
The HS3 is Modular Driven Technologies (MDT) newest chassis for Remington 700 short action rifles. The foundation of the system is an aluminum frame that adds a detachable box magazine and accepts AR-15/M16 M4 stocks […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
Introduction I cut back a 28″ barrel 308 Winchester one inch at a time, to 16.5″, and recorded velocity data for four different cartridges. The data was summarized in 308 Winchester / 7.62x51mm NATO: Barrel Length […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.