rifleshooter.com

Building a 300 Winchester Magnum Precision Rifle

September 18, 2014 Bill Marr 0

I am a huge 300 Winchester Magnum fan. I took a hacksaw and Sawzall to one in 300 Winchester Magnum: How Does Barrel Length Change Velocity- A 16″ 300 Win Mag? And if that wasn’t ridiculous […]

Re-chambering a barrel: 243 Winchester to 6×47 Lapua

September 14, 2014 Bill Marr 0

Often high-volume shooters will re-chamber or set back a used barrel. Most do it to change calibers or give a worn throat new life. You need to have enough barrel shank to set back a […]

Rifle bedding: How to bed a match rifle

September 13, 2014 Bill Marr 0

Bedding a rifle increases accuracy by creating a precise fit between the stock and the action. This precise fit eliminates stress in the action and provides a solid foundation for an accurate rifle. My friend […]

6.5 X 47 Lapua Range Report

August 13, 2014 Bill Marr 0

Designed to work in short action rifles with a standard .308 bolt face, feed reliably from detachable box magazines and utilize small rifle primers, the 6.5 X 47 Lapua has been an absolute pleasure to […]

Custom Remington 700 223 Wylde

August 6, 2014 Bill Marr 0

When my friend let me cut up his rifle for 223 Remington/5.56 NATO, velocity versus barrel length: A man, his chop box and his friend’s rifle, I also agreed to help him rebuild it. We used […]

Bob Marvel Custom 1911 Classes

August 5, 2014 Bill Marr 0

Bob Marvel will be offering custom 1911 classes in Asheboro, North Carolina. Marvel is well known for his custom 1911s. The cost of the ten day class includes the parts needed for a student […]

Spuhr Ideal Scope Mount System (ISMS)

August 1, 2014 Bill Marr 0

I’ve been using the Spuhr Ideal Scope Mount System (ISMS) on my rifle for the past two years. Equipped with a Picatinny rail interface, the ISMS is machined from a single billet of 7075 Aluminum […]

Muzzle brake shock waves in the sand

July 31, 2014 Bill Marr 0

I was shooting a 300 Winchester Magnum rifle prone and couldn’t understand why my phone was so dusty- that’s when I noticed the shock waves in the sand. The muzzle brake was eight inches above […]

Cerakote tip: Clean out your ejector hole before final assembly

July 26, 2014 Bill Marr 0

Even when I am very careful prepping metal work, abrasives have a habit of getting into hard to reach places. I always use a drill bit to clean out my ejector holes on my bolt […]

BAT Machine’s Model VR 2-Lug Short Action Repeater: A Remington 700 Size Action

July 25, 2014 Bill Marr 0

My friend purchased a BAT Machine Model VR short action (left-handed). This action has a Remington 700 short action footprint so it will work with standard Remington bottom metal. The Model VR action includes an […]