We keep cutting barrels and they keep getting shorter! Life is a series of choices involving some sort of compromise- just like building a rifle. When configuring a bolt action rifle, many compromises must be […]
The 260 Remington has gained quite a following in recent years. Adopted by SAAMI in 1999, this flat shooting 6.5mm cartridge housed in a necked down .308 Winchester case and affords the shooter, especially the […]
Blueprinting, or truing a rifle action ensures the receiver face, threads, lugs, bolt lugs and bolt face are square to the center line of the receiver. As part of the blueprinting process for bolt action rifles, the bolt […]
External Remington 700 bolt stop- no step cut installation In our first post on installing an external bolt stop for an M700, we made a step cut into the receiver (similar to a Blackheart International […]
Installing an External Bolt Stop/Release on a Remington 700 The factory bolt stop/release mechanism on Remington 700 rifles is sometimes considered a weak point in the design. If the stop mechanism binds in the narrow […]
Building a Custom Remington 700 .308 Tactical Rifle Who doesn’t love a heavy barrel .308? Our receiver for this project is a Remington 700 short action that had been coated by Fail-Zero with their EXO […]
Blueprinting, or truing a rifle action ensures the receiver face, threads, lugs, bolt lugs and bolt face are square to the center line of the receiver. In this article, we will start with a new Remington 700 short […]
All content Copyright 1998-2018 Rifleshooter.com, FTC disclosure: some links on this site are monetized
You must be logged in to post a comment.